FOR SALE
For Sale 1990 Polaris Indy 500
2064.5 total miles
HPE Agressive Trail Carbides
Heated Hand Grips
Heated Thumb Grip
Left Additional Instrument Pod Dual Exhast Temp Gauge
Right Additional Instrument Pod Water Temp Gauge
Reversed Track
Aluminum Reinforced Tunnel
96 Gold Digger II studs in welded on Hooker 3/2/3 system
48 Gold Digger II studs in Bender Reverse Track Plates
Gutted Air Box
Clutch Springs set to engage at 210 RPM
Every sticker removed.
Hidden Kill Switch
All paperwork & receipts
Polaris Factory Service Manual
Spare Gold Diggers, Bender Plates, Hooker Plates, etc...
There are 2 problems:
1. One front end stabilizer bar has a slight bend in it. This needs to be straightened, and the front end needs alignment.
2. The carbs need a rebuild kit. The sled has sat for 2 years...
If you are really picky like me, you will probably replace all the gas tubing when you remove the carbs for rebuild.